Key Features

• RTR
• .26V2 engine
• 007 HT tuned pipe with round header
• Fuel tank with mulit position pressure tap
• 13 tooth clutch bell
• 45 degree CVD's front/rear
• CVD dust boots
• Spektrum DX2 radio system
• Hard anodized shock bodies with 3.5mm shock shafts
• Aluminum Inner Suspension Mounts
• Threaded shock adjustment collars
• Rubber shock boots
• FCG chassis 3mm 6061-T6 aluminum, hard anodized
• Torque Rod Stiffeners
• Blue anodized wheel hubs
• Ackerman adjustable steering rack

Overview

Designed from the ground up to cause an uproar on any track, the Turmoil? RTR from Sportwerks? offers more race proven features and performance than any other ready-to-run buggy in its class. The new FCG (Forward Center of Gravity) chassis design moves the engine and center differential forward
for more balanced handling across nearly any surface, even in high-speed turns. Hard-anodized threaded aluminum shocks soak up the terrain while rubber shock boots protect the 3.5mm shafts and seal from moisture and dirt. And lightweight, high strength aluminum chassis parts reduce chassis flex for added stability and control.

The Turmoil RTR also features Sportwerks' .26 V2 Engine and 007 HT Tuned Pipe, as well as the innovative, crystal-free DX2 radio system from Spektrum?. With these pro-level features and more, the Turmoil RTR from Sportwerks is "designed for disorder."

Spektrum DX2 Computer Radio System
Spektrum's preinstalled and adjusted DX2 radio features digital trims, sub-trims, steering dual rate, end point adjustment and 2-model memory, all with the convenience of crystal-free DSMŽ technology. An SR3000 DSM receiver and Z-590 high-torque steering servo (85 oz/in of torque) are included.

Durable Chassis and Accessories
With the 3mm 6061-T6 aluminum Forward Center of Gravity (FCG) chassis design, the engine and center differential are moved forward in the chassis, providing more balanced handling. An Ackerman adjustable steering rack improves turning response, and aluminum inner suspension mounts and beefy torque rod stiffeners add strength.

Push-Button Handheld Electric Starter
The convenient handheld electric starter features a gear-driven high-torque 550 motor powered by a 7.2V car pack (battery not included).

Prepainted and Trimmed Body
The sleek new body comes prepainted and trimmed with window stickers applied. A Sportwerks decal sheet is also included.

SWK .26 V2 Engine and 007 HT Tuned Pipe
The Sportwerks V2 racing engine features a 7-port design, turbo crankshaft with flow-ported passageways and lightened crank weight. Additional performance features on the V2 include a knife-edge connecting rod, high-quality Swiss-made bearing that seals the engine, and an oversized aluminum heat sink head to help optimize cooling.

Specs

• Type:4wd Off-road
• Scale:1/8
• Length:19.4 in (492mm)
• Width:Front Adjutsble: 10.6-12.2in (270-310mm) Rear: 12.2in (310mm)
• Wheelbase:12.8 to 13.0 in (325mm-330mm)
• Weight:7.6 lb (3.4kg)
• Chassis:3mm 6061-T6 Aluminum, Hard-anodized
• Suspension:Front: Pivot Ball / Rear: H-Arm
• Drive Train:Center drive with 3 Sealed Differentials
• Tire Type:Havok (medium pin) Pre-glued
• Motor or Engine:Sportwerks .26V2 with 007 HT tuned exhaust
• Radio:Spektrum DX2 Computer Radio System
• Servos:Steering: Z590 / Throttle: Z270
• Speed:40+ MPH
• Kit/RTR:RTR
• Shock Type:Threaded aluminum body w/3.5mm shock shafts
• Body:Low profile, pre-painted and pre-trimmed
• Ball Bearings:Rubber sealed (6) 8x16x5, (8) 6x10x3, (2) 5x10x4
• Fuel Tank Capacity:126cc

Needed to Complete

12 AA Batteries (8) for Transmitter, (4) for receiver
1 C size battery (for glow igniter)
7.2 Volt battery and charger (for electric start)
Nitro Fuel
Fuel Bottle
Air Filter Oil